Care and Handling of Metal Prints

Handling:

For MetalPrints with foam Float Mounts, please make sure to remove all tape securing print to the box, so that the print is not bent when removing from box.
For MetalPrints with Flush or Inset Frames, please be careful when removing print from box or crate, not to twist the frame. After cutting the plastic strapping
bands, lift one side straight up and rest it carefully along one long edge. Carefully removing any foam packing strips.
Careful not to drop or bump edges or corners.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Hanging:
Framed MetalPrints can be hung using the wire hanger provided and an appropriate wall hook. Or, some people prefer to hang the frame directly from
the inside edge of the frame. Use appropriate hooks so it does not fall!
Be sure that your hooks are of appropriate strength for the frame. You may want to install wall anchors or other secure hanging devices.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Care:
MetalPrints can be cleaned using a soft cloth or towel (avoid scratchy paper towels). If necessary, you can use water or window cleaner (like Windex) to remove fingerprints or dust.